kenmore side by side ice maker replacement
# Kenmore Side-by-Side Ice Maker Replacement - A Comprehensive Guide for Homeowners
If your Kenmore side-by-side refrigerators ice maker is giving you trouble, youre not alone. Ice makers are one of the most common appliance repairs, and Kenmore is no exception. The good news is that replacing a Kenmore side-by-side ice maker is a relatively easy DIY project that can be completed in a few hours.
In this blog post, well walk you through the step-by-step process of replacing a Kenmore side-by-side ice maker. Well also provide some tips on troubleshooting common ice maker problems.
## Tools and Materials Youll Need
Before you start, gather the following tools and materials:
* New Kenmore side-by-side ice maker
* Screwdriver
* Nut driver
* Adjustable wrench
* Pliers
* Bucket or bowl
* Towel
## Step-by-Step Instructions
1. **Unplug the refrigerator.** Safety first! Before you start working on your ice maker, unplug the refrigerator from the wall outlet.
2. **Remove the ice bin.** Most ice bins are simply lifted out of the freezer compartment. If your ice bin is stuck, gently pry it loose with a screwdriver.
3. **Locate the ice maker.** The ice maker is usually located at the back of the freezer compartment, behind the ice bin.
4. **Disconnect the water line.** Use a nut driver to disconnect the water line from the ice maker. Be careful not to damage the water line.
5. **Remove the electrical connector.** Disconnect the electrical connector from the ice maker.
6. **Remove the mounting screws.** Use a screwdriver to remove the mounting screws that hold the ice maker in place.
7. **Pull out the old ice maker.** Gently pull the old ice maker out of the freezer compartment.
8. **Install the new ice maker.** Insert the new ice maker into the freezer compartment and line up the mounting holes.
9. **Secure the ice maker.** Tighten the mounting screws to secure the ice maker in place.
10. **Connect the water line.** Use a nut driver to connect the water line to the ice maker.
11. **Connect the electrical connector.** Connect the electrical connector to the ice maker.
12. **Replace the ice bin.** Insert the ice bin into the freezer compartment.
13. **Plug in the refrigerator.** Plug the refrigerator back into the wall outlet.
14. **Test the ice maker.** Press the ice maker button and wait for it to produce ice.
## Troubleshooting Common Ice Maker Problems
If your Kenmore side-by-side ice maker is not working properly, there are a few things you can check:
* **Is the water line connected?** Make sure that the water line is properly connected to the ice maker.
* **Is the electrical connector connected?** Make sure that the electrical connector is properly connected to the ice maker.
* **Is the ice maker turned on?** Make sure that the ice maker is turned on.
* **Is the freezer cold enough?** The freezer should be set to a temperature of 0 degrees Fahrenheit or below.
* **Is the water filter clogged?** A clogged water filter can restrict water flow to the ice maker.
* **Is the ice maker frozen?** If the ice maker is frozen, it will not be able to produce ice.
If you have checked all of these things and your ice maker is still not working, you may need to call a qualified appliance repair technician.
## Conclusion
Replacing a Kenmore side-by-side ice maker is a relatively easy DIY project that can be completed in a few hours. By following the steps in this guide, you can save yourself the cost of a professional repair.