Kenmore Elite Ice Maker Parts Diagram: The Ultimate Guide
Kenmore Elite Ice Maker Parts Diagram: The Ultimate Guide
The Kenmore Elite ice maker is a high-quality appliance that can produce up to 6 pounds of ice per day. It is a great addition to any home, but like all appliances, it can occasionally experience problems. If your Kenmore Elite ice maker is not working properly, you may need to replace one or more of its parts.
This guide will provide you with a detailed Kenmore elite ice maker parts diagram and explain how to replace each part. We will also provide you with troubleshooting tips to help you solve common problems with your ice maker.
How to Replace Kenmore Elite Ice Maker Parts
Replacing Kenmore Elite ice maker parts is a relatively simple process that can be completed in a few minutes. The following steps will guide you through the process:
1. **Unplug the ice maker from the power outlet.**
2. **Remove the ice bin.**
3. **Locate the part that needs to be replaced.**
4. **Disconnect the wires from the part.**
5. **Remove the screws that hold the part in place.**
6. **Install the new part.**
7. **Tighten the screws.**
8. **Reconnect the wires.**
9. **Replace the ice bin.**
10. **Plug the ice maker back into the power outlet.**
Troubleshooting Common Kenmore Elite Ice Maker Problems
If your Kenmore Elite ice maker is not working properly, there are a few things you can do to troubleshoot the problem:
* **Check the power supply.** Make sure that the ice maker is plugged into a power outlet and that the power is turned on.
* **Check the water supply.** Make sure that the ice maker is connected to a water source and that the water is turned on.
* **Check the ice bin.** Make sure that the ice bin is properly installed and that there is no ice blocking the auger.
* **Check the evaporator coils.** Make sure that the evaporator coils are clean and free of frost.
* **Check the thermistor.** The thermistor is a sensor that measures the temperature of the ice maker. If the thermistor is faulty, the ice maker may not be able to produce ice.
If you have checked all of the above and your ice maker is still not working properly, you may need to call a qualified appliance repair technician.
Kenmore Elite Ice Maker Parts Diagram
The following diagram shows the location of the most common Kenmore Elite ice maker parts:
[Image of Kenmore Elite ice maker parts diagram]
Kenmore Elite Ice Maker Parts List
The following table lists the most common Kenmore Elite ice maker parts and their part numbers:
| Part Name | Part Number |
|---|---|
| Auger | 4317943 |
| Control board | 4317944 |
| Evaporator coils | 4317945 |
| Ice bin | 4317946 |
| Thermistor | 4317947 |
| Water inlet valve | 4317948 |
Conclusion
Replacing Kenmore Elite ice maker parts is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can easily replace any of the most common ice maker parts. If you are experiencing problems with your Kenmore Elite ice maker, be sure to check the power supply, water supply, ice bin, evaporator coils, and thermistor before calling a qualified appliance repair technician.
